Cabletron Systems 2E42-27R User Manual

To set the system date, perform the following steps:

Use the arrow keys to highlight the Device Date field.

Enter the date in an MM/DD/YYYY format.

Press ENTER to set the system calendar to the date in the input field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the date entered is a valid format, the Event Message Line at the top of 
the screen displays “SAVED OK”. If the entry is not valid, Local 
Management does not alter the current value, but it does refresh the 
Device Date field with the previous value.

To set the device clock, perform the following steps:

Use the arrow keys to highlight the Device Time field.

Enter the time in a 24-hour format, HH:MM:SS.

Press ENTER to set the system clock to the time in the input field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the time entered is a valid format, the Event Message Line at the top of 
the screen displays “SAVED OK”. If the entry is not valid, Local 
Management does not alter the current value and refreshes the Device 
Time field with the previous value.

It is not necessary to add separators between month, day, and 
year numbers, as long as each entry has the correct number of 
numeric characters. For example, to set the date to 
03/17/1997, type “03171997” in the Device Date field.

When entering the time in the system time field, separators 
between hours, minutes, and seconds are not needed as long 
as each entry uses two numeric characters. For example, to set 
the time to 6:45

 

P

.

M

., type “184500” in the Device Time field.