ICP DAS USA SAGP-845EV User Manual
59
4. Reboot the system to the DOS command prompt using the boot
diskette you just made.
5. At the DOS command prompt type , "awdflash filename.xxx",
where filename.xxx is the file name of the BIOS file . Hit enter.
6. Your first option, in sequence, will be to save the old BIOS. We
recommend that you do that in case, for whatever reason, you
decide you don't wish to use the new version once it is installed.
decide you don't wish to use the new version once it is installed.
NOTES:
A. If you decide to save the old BIOS, PLEASE make
sure you do NOT save it to the same file name as the
new BIOS - if you use the same BIOS name the old
file will be written over the new file with NO warning
prompt. A simple file name to save the old BIOS to is
OLDBIOS.BIN.
new BIOS - if you use the same BIOS name the old
file will be written over the new file with NO warning
prompt. A simple file name to save the old BIOS to is
OLDBIOS.BIN.
B. If you do NOT decide to save the old BIOS, PLEASE
at least write down the version number of the old
BIOS and store that information with your important
computer documents. Enter N (for "no") and skip to
step 9.
BIOS and store that information with your important
computer documents. Enter N (for "no") and skip to
step 9.
7. To save the old BIOS, hit Y (for "yes")
8. Enter a name for the OLD BIOS file and hit enter.
NOTE:
PLEASE be sure you do NOT save the old BIOS file to
the same file name as the new BIOS - if you use the
same BIOS name, the old file will write over the new
BIOS file WITHOUT a warning prompt. A simple file
name for saving the old BIOS to is OLDBIOS.BIN.
the same file name as the new BIOS - if you use the
same BIOS name, the old file will write over the new
BIOS file WITHOUT a warning prompt. A simple file
name for saving the old BIOS to is OLDBIOS.BIN.