Cabletron Systems 6H129-08 User Manual

Press ENTER to set the module time to the time in the input field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the time entered is a valid format, the Event Message Line at the top of 
the screen displays “SAVED OK”. If the entry is not valid, Local 
Management does not alter the current value and refreshes the Module 
Time field with the previous value.

The screen refresh time is set from 3 to 99 seconds with a default of 3 
seconds. To set a new screen refresh time, perform the following steps:

Use the arrow keys to highlight the Screen Refresh Time field.

Enter a number from 3 to 99.

Press ENTER to set the refresh time to the time entered in the input 
field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the time entered is within the 3 to 99 seconds range, the Event Message 
Line at the top of the screen displays “SAVED OK”. If the entry is not 
valid, Local Management does not alter the current setting, but it does 
refresh the Screen Refresh Time field with the previous value.

When entering the time in the Module Time field, separators 
between hours, minutes, and seconds do not need to be added 
as long as each entry uses two numeric characters. For 
example, to set the time to 6:45

 

A

.

M

., type “064500” in the 

Module Time field.