Cisco Systems 3130 User Manual
4-7
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 4 Configuring Cisco IOS CNS Agents
Configuring Cisco IOS Agents
Note
For more information about running the setup program and creating templates on the Configuration
Engine, see the Cisco Configuration Engine Installation and Setup Guide, 1.5 for Linux at this URL:
Engine, see the Cisco Configuration Engine Installation and Setup Guide, 1.5 for Linux at this URL:
Table 4-1
Prerequisites for Enabling Automatic Configuration
Device
Required Configuration
Access switch
Factory default (no configuration file)
Distribution switch
•
IP helper address
•
Enable DHCP relay agent
•
IP routing (if used as default gateway)
DHCP server
•
IP address assignment
•
TFTP server IP address
•
Path to bootstrap configuration file on the TFTP server
•
Default gateway IP address
TFTP server
•
A bootstrap configuration file that includes the CNS
configuration commands that enable the switch to
communicate with the Configuration Engine
configuration commands that enable the switch to
communicate with the Configuration Engine
•
The switch configured to use either the switch MAC address
or the serial number (instead of the default hostname) to
generate the ConfigID and EventID
or the serial number (instead of the default hostname) to
generate the ConfigID and EventID
•
The CNS event agent configured to push the configuration file
to the switch
to the switch
CNS Configuration Engine
One or more templates for each type of device, with the ConfigID
of the device mapped to the template.
of the device mapped to the template.