Cisco Systems 3130 User Manual

Page of 1226
 
44-53
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 44      Configuring IP Multicast Routing
Monitoring and Maintaining IP Multicast Routing
To return to the default setting, use the no ip dvmrp metric-offset interface configuration command.
Monitoring and Maintaining IP Multicast Routing
These sections describe how to monitor and maintain IP multicast routing:
Clearing Caches, Tables, and Databases
You can remove all contents of a particular cache, table, or database. Clearing a cache, table, or database 
might be necessary when the contents of the particular structure are or suspected to be invalid. 
You can use any of the privileged EXEC commands in 
 to clear IP multicast caches, tables, 
and databases:
Step 3
ip dvmrp metric-offset [in | out
increment
Change the metric added to DVMRP routes advertised in incoming 
reports.
The keywords have these meanings:
(Optional) in—Specifies that the increment value is added to 
incoming DVMRP reports and is reported in mrinfo replies.
(Optional) out—Specifies that the increment value is added to 
outgoing DVMRP reports for routes from the DVMRP routing 
table.
If neither in nor out is specified, in is the default.
For increment, specify the value that is added to the metric of a DVMRP 
router advertised in a report message. The range is 1 to 31.
If the ip dvmrp metric-offset command is not configured on an 
interface, the default increment value for incoming routes is 1, and the 
default for outgoing routes is 0.
Step 4
end
Return to privileged EXEC mode.
Step 5
show running-config
Verify your entries.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Table 44-4
Commands for Clearing Caches, Tables, and Databases
Command
Purpose
clear ip cgmp
Clear all group entries the Catalyst switches have 
cached.
clear ip dvmrp route {* | route}
Delete routes from the DVMRP routing table.