Cisco Systems 3130 User Manual
46-11
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 46 Configuring Fallback Bridging
Monitoring and Maintaining Fallback Bridging
Monitoring and Maintaining Fallback Bridging
To monitor and maintain the network, use one or more of the privileged EXEC commands in
:
To display the bridge-group MAC address table on a stack member, start a session from the stack master
to the stack member by using the session stack-member-number global configuration command. Enter
the show bridge [bridge-group] [interface-id | mac-address | verbose] privileged EXEC command at the
stack member prompt.
to the stack member by using the session stack-member-number global configuration command. Enter
the show bridge [bridge-group] [interface-id | mac-address | verbose] privileged EXEC command at the
stack member prompt.
For information about the fields in these displays, see the Cisco IOS Bridging and IBM Networking
Command Reference, Volume 1 of 2, Release 12.2.
Command Reference, Volume 1 of 2, Release 12.2.
Table 46-2
Commands for Monitoring and Maintaining Fallback Bridging
Command
Purpose
clear bridge bridge-group
Removes any learned entries from the forwarding
database.
database.
show bridge [bridge-group] group
Displays details about the bridge group.
show bridge [bridge-group] [interface-id |
mac-address | verbose]
mac-address | verbose]
Displays MAC addresses learned in the bridge group.