Cisco Systems 3130 User Manual

Page of 1226
 
47-18
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 47      Troubleshooting
Using the show platform forward Command
Note
Be aware that the debugging destination you use affects system overhead. Logging messages to the 
console produces very high overhead, whereas logging messages to a virtual terminal produces less 
overhead. Logging messages to a syslog server produces even less, and logging to an internal buffer 
produces the least overhead of any method.
When stack members generate a system error message, the stack master displays the error message to 
all stack members. The syslog resides on the stack master. 
Note
Make sure to save the syslog to flash memory so that the syslog is not lost if the stack master fails. 
For more information about system message logging, see 
Using the show platform forward Command
The output from the show platform forward privileged EXEC command provides some useful 
information about the forwarding results if a packet entering an interface is sent through the system. 
Depending upon the parameters entered about the packet, the output provides lookup table results and 
port maps used to calculate forwarding destinations, bitmaps, and egress information. 
Note
For more syntax and usage information for the show platform forward command, see the switch 
command reference for this release.
Most of the information in the output from the command is useful mainly for technical support 
personnel, who have access to detailed information about the switch application-specific integrated 
circuits (ASICs). However, packet forwarding information can also be helpful in troubleshooting.
This is an example of the output from the show platform forward command on port 1 in VLAN 5 when 
the packet entering that port is addressed to unknown MAC addresses. The packet should be flooded to 
all other ports in VLAN 5.
Switch# show platform forward gigabitethernet1/0/1 vlan 5 1.1.1 2.2.2 ip 13.1.1.1 13.2.2.2 
udp 10 20     
Global Port Number:24, Asic Number:5
Src Real Vlan Id:5, Mapped Vlan Id:5
Ingress:
 Lookup                   Key-Used                    Index-Hit  A-Data
InptACL  40_0D020202_0D010101-00_40000014_000A0000     01FFA   03000000
L2Local  80_00050002_00020002-00_00000000_00000000     00C71   0000002B
Station Descriptor:02340000, DestIndex:0239, RewriteIndex:F005
==========================================
Egress:Asic 2, switch 1
Output Packets:
------------------------------------------
Packet 1
 Lookup                   Key-Used                    Index-Hit  A-Data
OutptACL 50_0D020202_0D010101-00_40000014_000A0000     01FFE   03000000
Port       Vlan      SrcMac          DstMac    Cos  Dscpv