Cisco Systems 3130 User Manual
C H A P T E R
6-1
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
6
Administering the Switch
This chapter describes how to perform one-time operations to administer the switch. Unless otherwise
noted, the term switch refers to a standalone switch and to a switch stack.
noted, the term switch refers to a standalone switch and to a switch stack.
This chapter consists of these sections:
•
•
•
•
•
Managing the System Time and Date
You can manage the system time and date on your switch using automatic configuration, such as the
Network Time Protocol (NTP), or manual configuration methods.
Network Time Protocol (NTP), or manual configuration methods.
Note
For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Configuration Fundamentals Command Reference, Release 12.2.
Configuration Fundamentals Command Reference, Release 12.2.
These sections contain this configuration information:
•
•
•
•
Understanding the System Clock
The heart of the time service is the system clock. This clock runs from the moment the system starts up
and keeps track of the date and time.
and keeps track of the date and time.
The system clock can then be set from these sources:
•
NTP
•
Manual configuration