Cisco Systems 3130 User Manual

Page of 1226
 
6-5
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 6      Administering the Switch
Managing the System Time and Date
To disable NTP authentication, use the no ntp authenticate global configuration command. To remove 
an authentication key, use the no ntp authentication-key number global configuration command. To 
disable authentication of the identity of a device, use the no ntp trusted-key key-number global 
configuration command.
This example shows how to configure the switch to synchronize only to devices providing authentication 
key 42 in the device’s NTP packets:
Switch(config)# ntp authenticate
Switch(config)# ntp authentication-key 42 md5 aNiceKey
Switch(config)# ntp trusted-key 42
Configuring NTP Associations
An NTP association can be a peer association (this switch can either synchronize to the other device or 
allow the other device to synchronize to it), or it can be a server association (meaning that only this 
switch synchronizes to the other device, and not the other way around). 
Step 3
ntp authentication-key number md5 value
Define the authentication keys. By default, none are defined.
For number, specify a key number. The range is 1 to 
4294967295.
md5 specifies that message authentication support is provided 
by using the message digest algorithm 5 (MD5).
For value, enter an arbitrary string of up to eight characters for 
the key.
The switch does not synchronize to a device unless both have one 
of these authentication keys, and the key number is specified by the 
ntp trusted-key key-number command.
Step 4
ntp trusted-key key-number
Specify one or more key numbers (defined in Step 3) that a peer 
NTP device must provide in its NTP packets for this switch to 
synchronize to it.
By default, no trusted keys are defined.
For key-number, specify the key defined in Step 3.
This command provides protection against accidentally 
synchronizing the switch to a device that is not trusted.
Step 5
end
Return to privileged EXEC mode.
Step 6
show running-config
Verify your entries.
Step 7
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose