Cisco Systems 3130 User Manual
8-3
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 8 Configuring SDM Templates
Understanding the SDM Templates
SDM Templates and Switch Stacks
All stack members must use the same SDM desktop template that is stored on the stack master. When a
new switch is added to a stack, the SDM configuration that is stored on the stack master overrides the
template configured on an individual switch. For more information about stacking, see
new switch is added to a stack, the SDM configuration that is stored on the stack master overrides the
template configured on an individual switch. For more information about stacking, see
You can use the show switch privileged EXEC command to see if any stack members are in SDM
mismatch mode. This example shows the output from the show switch privileged EXEC command when
an SDM mismatch exists:
mismatch mode. This example shows the output from the show switch privileged EXEC command when
an SDM mismatch exists:
Switch# show switch
Current
Switch# Role Mac Address Priority State
------------------------------------------------------------
*2 Master 000a.fdfd.0100 5 Ready
4 Member 0003.fd63.9c00 5 SDM Mismatch
This is an example of a syslog message notifying the stack master that a stack member is in SDM
mismatch mode:
mismatch mode:
2d23h:%STACKMGR-6-SWITCH_ADDED_SDM:Switch 2 has been ADDED to the stack (SDM_MISMATCH)
2d23h:%SDM-6-MISMATCH_ADVISE:
2d23h:%SDM-6-MISMATCH_ADVISE:
2d23h:%SDM-6-MISMATCH_ADVISE:System (#2) is incompatible with the SDM
2d23h:%SDM-6-MISMATCH_ADVISE:template currently running on the stack and
2d23h:%SDM-6-MISMATCH_ADVISE:will not function unless the stack is
2d23h:%SDM-6-MISMATCH_ADVISE:downgraded. Issuing the following commands
2d23h:%SDM-6-MISMATCH_ADVISE:will downgrade the stack to use a smaller
Table 8-2
Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates
Resource
IPv4-and-IPv6
Default
Default
IPv4-and-IPv6
Routing
Routing
IPv4-and-IPv6
VLAN
VLAN
Unicast MAC addresses
2 K
1.5 K
8 K
IPv4 IGMP groups and multicast routes
1 K
1 K
1 K for IGMP
groups
groups
0 for multicast
routes
routes
Total IPv4 unicast routes:
3 K
2.75 K
0
•
Directly connected IPv4 hosts
2 K
1.5 K
0
•
Indirect IPv4 routes
1 K
1.25 K
0
IPv6 multicast groups
1 K
1 K
1 K
Directly connected IPv6 addresses
2 K
1.5 K
0
Indirect IPv6 unicast routes
1 K
1.25 K
0
IPv4 policy-based routing ACEs
0
0.25 K
0
IPv4 or MAC QoS ACEs (total)
0.5 K
0.5 K
0.5 K
IPv4 or MAC security ACEs (total)
1 K
0.5 K
1 K
IPv6 security ACEs
0.5 K
0.5 K
0.5 K