Cisco Systems 3130 User Manual
10-13
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 10 Configuring Interface Characteristics
Using the Internal Ethernet Management Port
For a nonstacking-capable switch or a standalone stacking-capable switch, connect the Ethernet
management port to the PC as shown in
management port to the PC as shown in
Figure 10-2
Connecting a Switch to a PC
All the Ethernet management ports on the stack members in the same enclosure are managed by the CMC
software that the enclosure is running. However, only the Ethernet management port for the stack master
is enabled. The active link is from the Ethernet management port on the stack master through the CMC
to the PC. If the stack master fails and a new stack master is elected, a new active link from the Ethernet
management port on the new stack master through the CMC to the PC must be established. In a stack
that has members in multiple enclosures, the PC must be able to connect to all of the enclosures with
stack members.
software that the enclosure is running. However, only the Ethernet management port for the stack master
is enabled. The active link is from the Ethernet management port on the stack master through the CMC
to the PC. If the stack master fails and a new stack master is elected, a new active link from the Ethernet
management port on the new stack master through the CMC to the PC must be established. In a stack
that has members in multiple enclosures, the PC must be able to connect to all of the enclosures with
stack members.
1
CMC
2
Internal Ethernet management port
201764
PC
Network
Uplink
ports
Blade switch
Blade switch
Blade switch
1
2
Enclosure 1