Cisco Systems 3130 User Manual

You can delete a global macro-applied configuration on a switch only by entering the no version of each 
command that is in the macro. You can delete a macro-applied configuration on an interface by entering 
the default interface interface-id interface configuration command.

This example shows how to display the cisco-desktop macro, how to apply the macro, and to set the 
access VLAN ID to 25 on an interface:

Switch# show parser macro cisco-desktop

--------------------------------------------------------------

Macro name : cisco-desktop

Macro type : default

# Basic interface - Enable data VLAN only

# Recommended value for access vlan (AVID) should not be 1

switchport access vlan $AVID

switchport mode access

# Enable port security limiting port to a single

# MAC address -- that of desktop

switchport port-security

switchport port-security maximum 1

# Ensure port-security age is greater than one minute

# and use inactivity timer

switchport port-security violation restrict

switchport port-security aging time 2

switchport port-security aging type inactivity

# Configure port as an edge network port

spanning-tree portfast

spanning-tree bpduguard enable

--------------------------------------------------------------

Switch#

Switch# configure terminal

Switch(config)# gigabitethernet1/0/4

Switch(config-if)# macro apply cisco-desktop $AVID 25

macro {apply | trace} macro-name 
[parameter {value}] [parameter 
{value}] [parameter {value}]

Append the Cisco-default macro with the required values by using the 
parameter value keywords, and apply the macro to the interface. 
Keywords that begin with $ mean that a unique parameter value is 
required.

You can use the macro apply macro-name ? command to display a list 
of any required values in the macro. If you apply a macro without 
entering the keyword values, the commands are invalid and are not 
applied.

Return to privileged EXEC mode.

show running-config interface 
interface-id

Verify that the macro is applied to an interface.

(Optional) Save your entries in the configuration file.