Cisco Systems 3130 User Manual

Page of 1226
C H A P T E R
 
13-1
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
13
Configuring VTP
This chapter describes how to use the VLAN Trunking Protocol (VTP) and the VLAN database for 
managing VLANs with the switch. Unless otherwise noted, the term switch refers to a standalone switch 
and to a switch stack.
Note
For complete syntax and usage information for the commands used in this chapter, see the command 
reference for this release.
The chapter consists of these sections:
Understanding VTP
VTP is a Layer 2 messaging protocol that maintains VLAN configuration consistency by managing the 
addition, deletion, and renaming of VLANs on a network-wide basis. VTP minimizes misconfigurations 
and configuration inconsistencies that can cause several problems, such as duplicate VLAN names, 
incorrect VLAN-type specifications, and security violations.
Before you create VLANs, you must decide whether to use VTP in your network. Using VTP, you can 
make configuration changes centrally on one or more switches and have those changes automatically 
communicated to all the other switches in the network. Without VTP, you cannot send information about 
VLANs to other switches. 
VTP is designed to work in an environment where updates are made on a single switch and are sent 
through VTP to other switches in the domain. It does not work well in a situation where multiple updates 
to the VLAN database occur simultaneously on switches in the same domain, which would result in an 
inconsistency in the VLAN database.
VTP functionality is supported across the stack, and all switches in the stack maintain the same VLAN 
and VTP configuration inherited from the stack master. When a switch learns of a new VLAN through 
VTP messages or when a new VLAN is configured by the user, the new VLAN information is 
communicated to all switches in the stack.
When a switch joins the stack or when stacks merge, the new switches get VTP information from the 
stack master.