Cisco Systems 3130 User Manual

Page of 1226
 
13-10
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 13      Configuring VTP
Configuring VTP
When you configure a domain name, it cannot be removed; you can only reassign a switch to a different 
domain. 
To return the switch to a no-password state, use the no vtp password global configuration command.
This example shows how to use global configuration mode to configure the switch as a VTP server with 
the domain name eng_group and the password mypassword:
Switch# config terminal
Switch(config)# vtp mode server
Switch(config)# vtp domain eng_group
Switch(config)# vtp password mypassword
Switch(config)# end
You can also use VLAN database configuration mode to configure VTP parameters. 
Beginning in privileged EXEC mode, follow these steps to use VLAN database configuration mode to 
configure the switch as a VTP server:
When you configure a domain name, it cannot be removed; you can only reassign a switch to a different 
domain. 
To return the switch to a no-password state, use the no vtp password VLAN database configuration 
command.
Step 4
vtp password password
(Optional) Set the password for the VTP domain. The password can be 8 to 
64 characters.
If you configure a VTP password, the VTP domain does not function 
properly if you do not assign the same password to each switch in the 
domain.
Step 5
end
Return to privileged EXEC mode.
Step 6
show vtp status
Verify your entries in the VTP Operating Mode and the VTP Domain Name 
fields of the display.
Command
Purpose
Command
Purpose
Step 1
vlan database
Enter VLAN database configuration mode.
Step 2
vtp server
Configure the switch for VTP server mode (the default).
Step 3
vtp domain domain-name 
Configure a VTP administrative-domain name. The name can be 1 to 32 
characters. All switches operating in VTP server or client mode under the 
same administrative responsibility must be configured with the same domain 
name.
Step 4
vtp password password
(Optional) Set a password for the VTP domain. The password can be 8 to 64 
characters.
If you configure a VTP password, the VTP domain does not function properly 
if you do not assign the same password to each switch in the domain.
Step 5
exit
Update the VLAN database, propagate it throughout the administrative 
domain, and return to privileged EXEC mode.
Step 6
show vtp status
Verify your entries in the VTP Operating Mode and the VTP Domain Name 
fields of the display.