Cisco Systems 3130 User Manual
C H A P T E R
21-1
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
21
Configuring DHCP Features and IP Source Guard
This chapter describes how to configure DHCP snooping and the option-82 data insertion features on the
switch. It also describes how to configure the IP source guard feature.Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
switch. It also describes how to configure the IP source guard feature.Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
Note
For complete syntax and usage information for the commands used in this chapter, see the command
reference for this release, and see the “DHCP Commands” section in the Cisco IOS IP Command
Reference, Volume 1 of 3: Addressing and Services, Release 12.2.
reference for this release, and see the “DHCP Commands” section in the Cisco IOS IP Command
Reference, Volume 1 of 3: Addressing and Services, Release 12.2.
This chapter consists of these sections:
•
•
•
•
•
•
Understanding DHCP Features
DHCP is widely used in LAN environments to dynamically assign host IP addresses from a centralized
server, which significantly reduces the overhead of administration of IP addresses. DHCP also helps
conserve the limited IP address space because IP addresses no longer need to be permanently assigned
to hosts; only those hosts that are connected to the network consume IP addresses.
server, which significantly reduces the overhead of administration of IP addresses. DHCP also helps
conserve the limited IP address space because IP addresses no longer need to be permanently assigned
to hosts; only those hosts that are connected to the network consume IP addresses.
These sections contain this information:
•
•
•
•
•
•
•