Cisco Systems 3130 User Manual

Page of 1226
 
21-4
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 21      Configuring DHCP Features and IP Source Guard
Understanding DHCP Features
 is an example of a blade switch in an enclosure in which a centralized DHCP server assigns 
IP addresses to subscribers connected to the switch at the access layer. Because the DHCP clients and 
their associated DHCP server do not reside on the same IP network or subnet, a DHCP relay agent (the 
blade switch) is configured with a helper address to enable broadcast forwarding and to transfer DHCP 
messages between the clients and the server.
Figure 21-1
DHCP Relay Agent in a Metropolitan Ethernet Network
When you enable the DHCP snooping information option 82 on the switch, this sequence of 
events occurs:
The Blade Server (DHCP client) generates a DHCP request and broadcasts it on the network.
When the blade switch receives the DHCP request, it adds the option-82 information in the packet. 
By default, the remote-ID suboption is the switch MAC address, and the circuit-ID suboption is the 
port identifier, vlan-mod-port, from which the packet is received.You can configure the remote ID 
and circuit ID. For information on configuring these suboptions, see the 
.
If the IP address of the relay agent is configured, the switch adds this IP address in the DHCP packet.
The blade switch forwards the DHCP request that includes the option-82 field to the DHCP server.
The DHCP server receives the packet. If the server is option-82-capable, it can use the remote ID, 
the circuit ID, or both to assign IP addresses and implement policies, such as restricting the number 
of IP addresses that can be assigned to a single remote ID or circuit ID. Then the DHCP server 
echoes the option-82 field in the DHCP reply.
The DHCP server unicasts the reply to the blade switch if the request was relayed to the server by 
the switch. The switch verifies that it originally inserted the option-82 data by inspecting the 
remote ID and possibly the circuit ID fields. The switch removes the option-82 field and forwards 
the packet to the switch port that connects to the DHCP client that sent the DHCP request.
In the default suboption configuration, when the described sequence of events occurs, the values in these 
fields in 
 do not change: 
Circuit-ID suboption fields
Suboption type
Length of the suboption type
Circuit-ID type
Length of the circuit-ID type
Subscribers
Blade switch
(DHCP relay agent)
Blade Server A
(DHCP client)
Access layer
DHCP
server
Blade Server B
(DHCP client)
201812
VLAN 10
Enclosure