Cisco Systems 3130 User Manual

Page of 1226
 
1-8
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 1      Overview
Features
Root guard for preventing switches outside the network core from becoming the spanning-tree 
root
Loop guard for preventing alternate or root ports from becoming designated ports because of a 
failure that leads to a unidirectional link
Equal-cost routing for link-level and switch-level redundancy
Flex Link Layer 2 interfaces to back up one another as an alternative to STP for basic link 
redundancy
Link-state tracking to mirror the state of the ports that carry upstream traffic from connected hosts 
and servers and to allow the failover of the server traffic to an operational link on another Cisco 
Ethernet switch
VLAN Features
These are the VLAN features:
Support for up to 1005 VLANs for assigning users to VLANs associated with appropriate network 
resources, traffic patterns, and bandwidth 
Support for VLAN IDs in the 1 to 4094 range as allowed by the IEEE 802.1Q standard
VLAN Query Protocol (VQP) for dynamic VLAN membership
Inter-Switch Link (ISL) and IEEE 802.1Q trunking encapsulation on all ports for network moves, 
adds, and changes; management and control of broadcast and multicast traffic; and network security 
by establishing VLAN groups for high-security users and network resources
Dynamic Trunking Protocol (DTP) for negotiating trunking on a link between two devices and for 
negotiating the type of trunking encapsulation (IEEE 802.1Q or ISL) to be used
VLAN Trunking Protocol (VTP) and VTP pruning for reducing network traffic by restricting 
flooded traffic to links destined for stations receiving the traffic
Voice VLAN for creating subnets for voice traffic from Cisco IP Phones
Dynamic voice virtual LAN (VLAN) for multidomain authentication (MDA) to allow a dynamic 
voice VLAN on an MDA-enabled port
VLAN 1 minimization for reducing the risk of spanning-tree loops or storms by allowing VLAN 1 
to be disabled on any individual VLAN trunk link. With this feature enabled, no user traffic is sent 
or received on the trunk. The switch CPU continues to send and receive control protocol frames.
Private VLANs to address VLAN scalability problems, to provide a more controlled IP address 
allocation, and to allow Layer 2 ports to be isolated from other ports on the switch
Port security on a PVLAN host to limit the number of MAC addresses learned on a port, or define 
which MAC addresses may be learned on a port
VLAN Flex Link Load Balancing to provide Layer 2 redundancy without requiring Spanning Tree 
Protocol (STP). A pair of interfaces configured as primary and backup links can load balance traffic 
based on VLAN.