Cisco Systems 3130 User Manual
23-29
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 23 Configuring IGMP Snooping and MVR
Displaying IGMP Filtering and Throttling Configuration
To return to the default action of dropping the report, use the no ip igmp max-groups action interface
configuration command.
configuration command.
Displaying IGMP Filtering and Throttling Configuration
You can display IGMP profile characteristics, and you can display the IGMP profile and maximum group
configuration for all interfaces on the switch or for a specified interface. You can also display the IGMP
throttling configuration for all interfaces on the switch or for a specified interface.
configuration for all interfaces on the switch or for a specified interface. You can also display the IGMP
throttling configuration for all interfaces on the switch or for a specified interface.
Use the privileged EXEC commands in
to display IGMP filtering and throttling
configuration:
Step 4
end
Return to privileged EXEC mode.
Step 5
show running-config interface
interface-id
interface-id
Verify the configuration.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Table 23-8
Commands for Displaying IGMP Filtering and Throttling Configuration
Command
Purpose
show ip igmp profile [profile
number]
number]
Displays the specified IGMP profile or all the IGMP profiles defined on the switch.
show running-config [interface
interface-id]
interface-id]
Displays the configuration of the specified interface or the configuration of all interfaces
on the switch, including (if configured) the maximum number of IGMP groups to which
an interface can belong and the IGMP profile applied to the interface.
on the switch, including (if configured) the maximum number of IGMP groups to which
an interface can belong and the IGMP profile applied to the interface.