Cisco Systems 3130 User Manual
1-15
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 1 Overview
Default Settings After Initial Switch Configuration
–
Auto-MDIX is enabled. For more information, see
–
Flow control is off. For more information, see
•
No Smartports macros are defined. For more information, see
•
VLANs
–
Default VLAN is VLAN 1. For more information, see
–
VLAN trunking setting is dynamic auto (DTP). For more information, see
–
Trunk encapsulation is negotiate. For more information, see
–
–
VTP version is Version 1. For more information, see
–
No private VLANs are configured. For more information, see
–
Voice VLAN is disabled. For more information, see
•
IEEE 802.1Q tunneling and Layer 2 protocol tunneling are disabled. For more information, see
•
STP, PVST+ is enabled on VLAN 1. For more information, see
•
MSTP is disabled. For more information, see
•
Optional spanning-tree features are disabled. For more information, see
•
Flex Links are not configured. For more information, see
•
DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
information, see
information, see
•
IP source guard is disabled. For more information, see
•
Dynamic ARP inspection is disabled on all VLANs. For more information, see
•
IGMP snooping is enabled. No IGMP filters are applied. For more information, see
•
IGMP throttling setting is deny. For more information, see
•
The IGMP snooping querier feature is disabled. For more information, see
•
MVR is disabled. For more information, see
•
Port-based traffic
–
Broadcast, multicast, and unicast storm control is disabled. For more information, see
–