Cisco Systems 3130 User Manual

Page of 1226
 
34-33
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 34      Configuring Network Security with ACLs
Configuring VLAN Maps
This example shows how to create a VLAN map to permit a packet. ACL ip2 permits UDP packets and 
any packets that match the ip2 ACL are forwarded. In this map, any IP packets that did not match any of 
the previous ACLs (that is, packets that are not TCP packets or UDP packets) would get dropped.
Switch(config)# ip access-list extended ip2
Switch(config-ext-nacl)# permit udp any any 
Switch(config-ext-nacl)# exit
Switch(config)# vlan access-map map_1 20
Switch(config-access-map)# match ip address ip2
Switch(config-access-map)# action forward
Example 2
In this example, the VLAN map has a default action of drop for IP packets and a default action of forward 
for MAC packets. Used with standard ACL 101 and extended named access lists igmp-match and 
tcp-match, the map will have the following results:
Forward all UDP packets
Drop all IGMP packets
Forward all TCP packets
Drop all other IP packets
Forward all non-IP packets
Switch(config)# access-list 101 permit udp any any
Switch(config)# ip access-list extended igmp-match
Switch(config-ext-nacl)# permit igmp any any
Switch(config)# ip access-list extended tcp-match
Switch(config-ext-nacl)# permit tcp any any
Switch(config-ext-nacl)# exit
Switch(config)# vlan access-map drop-ip-default 10
Switch(config-access-map)# match ip address 101
Switch(config-access-map)# action forward
Switch(config-access-map)# exit
Switch(config)# vlan access-map drop-ip-default 20
Switch(config-access-map)# match ip address igmp-match
Switch(config-access-map)# action drop
Switch(config-access-map)# exit
Switch(config)# vlan access-map drop-ip-default 30
Switch(config-access-map)# match ip address tcp-match
Switch(config-access-map)# action forward
Example 3
In this example, the VLAN map has a default action of drop for MAC packets and a default action of 
forward for IP packets. Used with MAC extended access lists good-hosts and good-protocols, the map 
will have the following results:
Forward MAC packets from hosts 0000.0c00.0111 and 0000.0c00.0211
Forward MAC packets with decnet-iv or vines-ip protocols
Drop all other non-IP packets
Forward all IP packets
Switch(config)# mac access-list extended good-hosts
Switch(config-ext-macl)# permit host 000.0c00.0111 any
Switch(config-ext-macl)# permit host 000.0c00.0211 any
Switch(config-ext-nacl)# exit
Switch(config)# mac access-list extended good-protocols
Switch(config-ext-macl)# permit any any decnet-ip