Cisco Systems 3130 User Manual

Page of 1226
 
38-18
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 38      Configuring IP Unicast Routing
Configuring IP Addressing
Beginning in privileged EXEC mode, follow these steps to use the bridging spanning-tree database to 
flood UDP datagrams:
Use the no ip forward-protocol spanning-tree global configuration command to disable the flooding 
of IP broadcasts.
In the switch, the majority of packets are forwarded in hardware; most packets do not go through the 
switch CPU. For those packets that do go to the CPU, you can speed up spanning tree-based UDP 
flooding by a factor of about four to five times by using turbo-flooding. This feature is supported over 
Ethernet interfaces configured for ARP encapsulation.
Beginning in privileged EXEC mode, follow these steps to increase spanning-tree-based flooding:
To disable this feature, use the no ip forward-protocol turbo-flood global configuration command. 
Monitoring and Maintaining IP Addressing
When the contents of a particular cache, table, or database have become or are suspected to be invalid, 
you can remove all its contents by using the clear privileged EXEC commands. 
 lists the 
commands for clearing contents.
You can display specific statistics, such as the contents of IP routing tables, caches, and databases; the 
reachability of nodes; and the routing path that packets are taking through the network. 
 lists 
the privileged EXEC commands for displaying IP statistics.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
ip forward-protocol spanning-tree 
Use the bridging spanning-tree database to flood UDP datagrams.
Step 3
end 
Return to privileged EXEC mode.
Step 4
show running-config
Verify your entry.
Step 5
copy running-config startup-config 
(Optional) Save your entry in the configuration file.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode
Step 2
ip forward-protocol turbo-flood
Use the spanning-tree database to speed up flooding of UDP datagrams.
Step 3
end 
Return to privileged EXEC mode.
Step 4
show running-config
Verify your entry.
Step 5
copy running-config startup-config 
(Optional) Save your entry in the configuration file.
Table 38-2
Commands to Clear Caches, Tables, and Databases
Command
Purpose
clear arp-cache
Clear the IP ARP cache and the fast-switching cache.
clear host {name | *}
Remove one or all entries from the hostname and the address cache.
clear ip route {network [mask] |*}
Remove one or more routes from the IP routing table.