Cisco Systems 3130 User Manual

To enable EIGRP, the switch or stack master must be running the IP services feature set.

 shows the default EIGRP configuration.

Auto summary

Enabled. Subprefixes are summarized to the classful network 
boundary when crossing classful network boundaries.

Default-information

Exterior routes are accepted and default information is passed 
between EIGRP processes when doing redistribution.

Default  metric

Only connected routes and interface static routes can be redistributed 
without a default metric. The metric includes:

Bandwidth: 0 or greater kb/s.

Delay (tens of microseconds): 0 or any positive number that is a 
multiple of 39.1 nanoseconds.

Reliability: any number between 0 and 255 (255 means 
100 percent reliability).

Loading: effective bandwidth as a number between 0 and 255 
(255 is 100 percent loading).

MTU: maximum transmission unit size of the route in bytes. 0 or 
any positive integer.

Distance

Internal distance: 90.

External distance: 170.

EIGRP log-neighbor changes

Disabled. No adjacency changes logged.

IP authentication key-chain

No authentication provided.

IP authentication mode

No authentication provided.

IP bandwidth-percent

50 percent.

IP hello interval

For low-speed nonbroadcast multiaccess (NBMA) networks: 
60 seconds; all other networks: 5 seconds.

IP hold-time

For low-speed NBMA networks: 180 seconds; all other networks: 
15 seconds.

IP split-horizon

Enabled.

IP summary address

No summary aggregate addresses are predefined.

Metric weights

tos: 0; k1 and k3: 1; k2, k4, and k5: 0

Network

None specified.