Cisco Systems 3130 User Manual

Page of 1226
 
38-56
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 38      Configuring IP Unicast Routing
Configuring BGP
path, community, and network numbers. Autonomous system path matching requires the match as-path 
access-lis
t route-map command, community based matching requires the match community-list 
route-map command, and network-based matching requires the ip access-list global configuration 
command.
Beginning in privileged EXEC mode, follow these steps to apply a per-neighbor route map:
Use the no neighbor distribute-list command to remove the access list from the neighbor. Use the no 
neighbor route-map
 map-tag router configuration command to remove the route map from the 
neighbor.
Another method of filtering is to specify an access list filter on both incoming and outbound updates, 
based on the BGP autonomous system paths. Each filter is an access list based on regular expressions. 
(See the “Regular Expressions” appendix in the Cisco IOS Dial Technologies Command Reference, 
Release 12.2 
for more information on forming regular expressions.) To use this method, define an 
autonomous system path access list, and apply it to updates to and from particular neighbors.
Beginning in privileged EXEC mode, follow these steps to configure BGP path filtering:
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
router bgp autonomous-system
Enable a BGP routing process, assign it an AS number, and enter 
router configuration mode.
Step 3
neighbor {ip-address | peer-group name
distribute-list {access-list-number | name
{in | out}
(Optional) Filter BGP routing updates to or from neighbors as 
specified in an access list. 
Note
You can also use the neighbor prefix-list router 
configuration command to filter updates, but you cannot use 
both commands to configure the same BGP peer.
Step 4
neighbor {ip-address | peer-group name
route-map map-tag {in | out}
(Optional) Apply a route map to filter an incoming or outgoing 
route.
Step 5
end 
Return to privileged EXEC mode.
Step 6
show ip bgp neighbors
Verify the configuration.
Step 7
copy running-config startup-config 
(Optional) Save your entries in the configuration file.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
ip as-path access-list access-list-number 
{permit | denyas-regular-expressions
Define a BGP-related access list.
Step 3
router bgp autonomous-system
Enter BGP router configuration mode.
Step 4
neighbor {ip-address | peer-group name
filter-list {access-list-number | name} {in | 
out | weight weight}
Establish a BGP filter based on an access list.
Step 5
end 
Return to privileged EXEC mode.
Step 6
show ip bgp neighbors [paths 
regular-expression]
Verify the configuration.
Step 7
copy running-config startup-config 
(Optional) Save your entries in the configuration file.