Cisco Systems 3130 User Manual

Note that not all of the IP SLAs commands or operations described in this guide are supported on the 
switch. The switch supports IP service level analysis by using UDP jitter, UDP echo, HTTP, TCP 
connect, ICMP echo, ICMP path echo, ICMP path jitter, FTP, DNS, and DHCP, as well as multiple 
operation scheduling and proactive threshold monitoring. It does not support VoIP service analysis or IP 
service level analysis by using DLSw+ operation.

Before configuring any IP SLAs application, you can use the show ip sla application privileged EXEC 
command to verify that the operation type is supported on your software image. This is an example of 
the output from the command:

Switch# show ip sla application

        IP SLAs

Version: 2.2.0 Round Trip Time MIB, Infrastructure Engine-II

Time of last change in whole IP SLAs: 22:17:39.117 UTC Fri Jun

Estimated system max number of entries: 15801

Estimated number of configurable operations: 15801

Number of Entries configured  : 0

Number of active Entries      : 0

Number of pending Entries     : 0

Number of inactive Entries    : 0

        Supported Operation Types

Type of Operation to Perform: 802.1agEcho

Type of Operation to Perform: 802.1agJitter

Type of Operation to Perform: dhcp

Type of Operation to Perform: dns

Type of Operation to Perform: echo

Type of Operation to Perform: ftp

Type of Operation to Perform: http

Type of Operation to Perform: jitter

Type of Operation to Perform: pathEcho

Type of Operation to Perform: pathJitter

Type of Operation to Perform: tcpConnect

Type of Operation to Perform: udpEcho

IP SLAs low memory water mark: 21741224