Gefen EXT-HDMIRS232-CAT5 Leaflet
Single-Link Range: 1080p/1920x1200
Input Video Signal: 1.2V p-p
Input DDC Signal: 5V p-p (TTL)
HDMI Connector: type A 19-pin Female
RS-232 Input Connector: DB-9 female
RS-232 Output Connector: DB-9 male
Conforms to RS-232 Standards
Link Connector: RJ-45 Shielded
Power Supply: 5V DC
Power Consumption: 20 Watts (maximum)
Dimensions: 3.4 x 5.9 x 1.3 inches
Shipping Weight: 5 lbs.
Input Video Signal: 1.2V p-p
Input DDC Signal: 5V p-p (TTL)
HDMI Connector: type A 19-pin Female
RS-232 Input Connector: DB-9 female
RS-232 Output Connector: DB-9 male
Conforms to RS-232 Standards
Link Connector: RJ-45 Shielded
Power Supply: 5V DC
Power Consumption: 20 Watts (maximum)
Dimensions: 3.4 x 5.9 x 1.3 inches
Shipping Weight: 5 lbs.
Extend HDMI and RS232
Specifications:
The HDMI RS-232 Extender sends flawless
HDMI, RS232 and IR signals
over two economical CAT-5 cables.
Extending state-of-the-art digital video displays,
computer monitors and touch screens has never
been easier.
computer monitors and touch screens has never
been easier.
Distances up to 150 feet at 1080p resolution
(300 feet at 1080i resolution) are guaranteed
to perform beautifully, giving you a reliable
method of all-digital extension while
streamlining your installation cabling needs.
(300 feet at 1080i resolution) are guaranteed
to perform beautifully, giving you a reliable
method of all-digital extension while
streamlining your installation cabling needs.
How it works
You simply connect the HDMI RS232 Extender
sender unit to your HDMI and RS232 source
using the supplied cables. Your RS232 device
and the HDMI display plug into the HDMI
RS-232 Extender's receiver unit. Two CAT-5
cables connect the sender and the receiver units
to each other allowing for up to 300 feet of
extension (300 feet at 1080i resolution or 150
feet of extension at 1080p resolution). You can
use the optional Gefen IR Emitter cable to
extend IR signals.
sender unit to your HDMI and RS232 source
using the supplied cables. Your RS232 device
and the HDMI display plug into the HDMI
RS-232 Extender's receiver unit. Two CAT-5
cables connect the sender and the receiver units
to each other allowing for up to 300 feet of
extension (300 feet at 1080i resolution or 150
feet of extension at 1080p resolution). You can
use the optional Gefen IR Emitter cable to
extend IR signals.
Gefen Inc.
20600 Nordhoff Street, Chatsworth, CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefen.com
EXT-HDMIRS232-CAT5
Features:
Supports resolutions up to 1080p, 2K, and 1920 x 1200
Sends video at distances of up to 300 feet (1080i) / 150 feet
(1080p)
Small and Compact
Improved compensation for cable skew
Audio and video are transmitted digitally over the CAT-5 cable for
zero signal loss
Eliminates equipment noise in the viewing environment
Extends any IR device
HDMI/HDCP Compliant
Sends video at distances of up to 300 feet (1080i) / 150 feet
(1080p)
Small and Compact
Improved compensation for cable skew
Audio and video are transmitted digitally over the CAT-5 cable for
zero signal loss
Eliminates equipment noise in the viewing environment
Extends any IR device
HDMI/HDCP Compliant
•
•
•
•
•
•
•
•
•
•
•
•
•