Enterasys Networks C3G124-48P User Manual
Rack Mounting the Switch
3-10 Hardware Installation
Figure 3-5 Attaching the Rackmount Brackets
2.
With the mounting brackets attached, position the switch between the vertical frame
members of the 19‐inch rack as shown in
members of the 19‐inch rack as shown in
. Then fasten the switch securely
to the frame using four mounting screws (user supplied).
Figure 3-6 Fastening the Switch to the Rack
3.
If you are installing this switch in a stacked configuration, repeat this procedure for
each switch until all switches have been installed in the stack, then proceed to
“
each switch until all switches have been installed in the stack, then proceed to
“
” on page 3‐11. Otherwise, proceed to
1 Rackmount brackets
2 M3 x 6 mm flathead screws
1 Rails of 19-inch rack
2 Mounting screws (supplied by user)