Link electronic VSW-824 Leaflet

Page of 2
800 SERIES
MADE IN THE USA
                    
           
LINK ELECTRONICS, INC.
VERTICAL INTERVAL VIDEO SWITCHER
8 X 1 S-VHS MATRIX, SERIAL CONTROL
MODEL VSW-824  
FEATURES
‹
 8 S-VHS Source  Inputs
‹
 1 Destination Output
‹
 Serial Controlled
‹
 Vertical Interval
‹
 Wide Bandwidth
‹
 Digital Switching
‹
 One Rack Unit Cabinet
‹
 Audio Follow Companion
‹
 Audio & Video Break-away
‹
 7 Seg LED Reads Source #
The VSW-824 Is a wide band-width vertical
Interval switcher designed for S-VHS inputs.  It's
eight terminated inputs and single output allow the
user to efficiently and economically route or
delegate multiple S-VHS video signals.
Packaged in a 19" rack mountable cabinet, the
VSW-824 features 8 S-VHS inputs. High-quality
push buttons and  LED digital readout of audio and
video channel selection make this unit an ideal
solution. Audio and video breakaway is front panel
controlled. .  Serial control is provided through a D-
Sub connector.  Remote control is provided
through a RJ-11 connector.  Serial control
characteristics are RS-232, RS-422 and RS-485.
Switching is accomplished during the vertical
interval by using the vertical sync derived from the
video at the output stage of the VSW-824 video
swftcher.
The VSW-824 is a video-only switcher with both
sets of LED digital readouts for the audio and
video selected.  When connected with the PAF-
823 audio follow unit, the VSW-824 selects the
video and it's Companion audio.  A three position
front panel switch selects audio follow, audio
breakaway, and video break-away.  There is one
output of the selected video on the rear panel.
LINK
 ELECTRONICS, INC.  
‹
   2137 Rust Avenue   
‹
  Cape Girardeau, MO 63703-7668
 Phone 573 334 4433    
‹
     FAX  573 334 9255