APC AP5616 User Manual
Chapter 4: Network Access Software 37
Customizing the window display
You can resize the Network Access Software window at any time. Each time you start the
application, the Network Access Software window opens to its default size and location.
application, the Network Access Software window opens to its default size and location.
A split-pane divider that runs from top to bottom separates the Group Selector pane and the Unit
Selector pane. You can move the divider left and right to change the viewing area of these two
panes. Each time the Network Access Software is opened, the divider returns to its default location.
Selector pane. You can move the divider left and right to change the viewing area of these two
panes. Each time the Network Access Software is opened, the divider returns to its default location.
You can specify which view (KVM switches, Servers, Sites or Folders) is visible on startup or you
can let the Network Access Software determine it.
can let the Network Access Software determine it.
You can change the order and sorting of the Unit list by clicking the sort bar above the column. An
upward-pointing arrow in a column header indicates that the list is sorted by that field name in
ascending order. A downward-pointing arrow indicates the list is sorted by that field name in
descending order.
upward-pointing arrow in a column header indicates that the list is sorted by that field name in
ascending order. A downward-pointing arrow indicates the list is sorted by that field name in
descending order.
Adding A KVM Switch
Before you can access the KVM switch through the software, you must add it to the software
database. After a KVM switch is added, it is visible in the Unit list. You can either manually add or
discover a KVM switch.
database. After a KVM switch is added, it is visible in the Unit list. You can either manually add or
discover a KVM switch.
To manually add a KVM switch with an assigned IP address:
1.
Select File — New — KVM switch from the Network Access Software menu.
— or —
Click the New KVM switch button.
The New KVM switch Wizard opens. Click Next.
2.
Select the type of KVM switch you are adding. Click Next.
3.
Click Yes to indicate the KVM switch has an assigned IP address, then click Next.
4.
Type the IP address and click Next.
5.
The software searches for the KVM switch.
The software searches for the indicated unit as well as all the KVM server modules and target
device names you associated with it in the OSD, if any. To search for KVM server modules
that are not receiving power, access the resync feature in the Servers category of the web
interface and select the Include Offline Server Access Modules checkbox.
device names you associated with it in the OSD, if any. To search for KVM server modules
that are not receiving power, access the resync feature in the Servers category of the web
interface and select the Include Offline Server Access Modules checkbox.
The Enter Tier Switch Information window opens if the software detects an attached tiered
switch. This window contains a list of all ports and KVM server module eIDs (Electronic
Identification Numbers) retrieved from the KVM switch and the tiered switch types to which
they are connected, if any. When this window first opens, all KVM switches are set to None.
Detected KVM switches have an icon next to the drop-down menu.
switch. This window contains a list of all ports and KVM server module eIDs (Electronic
Identification Numbers) retrieved from the KVM switch and the tiered switch types to which
they are connected, if any. When this window first opens, all KVM switches are set to None.
Detected KVM switches have an icon next to the drop-down menu.