Fujitsu FMW4503TS128A01 User Manual

Page of 110
1
Chapter 1
Pen Tablet Features
This chapter provides an introduction to the Stylistic 3500 pen tablet system hardware and gives an 
overview of some of the pen tablet system’s features. Detailed specifications on the features discussed in 
this chapter are given in other chapters of this guide. 
The Stylistic 3500 pen tablet computer is designed for the Windows 98 Second Edition, Windows NT 
Workstation 4.0, and Windows 2000 Professional operating systems. The system uses an resistive pen 
digitizer and is available with either an indoor color thin-film-transistor (TFT) display or an indoor/
outdoor color TFT display.
The Stylistic 3500 pen tablet system has been tested by Windows Hardware Quality Labs (WHQL) at 
Microsoft Corporation and is compliant with PC 99 system design guidelines. 
PC Card Support
1
The Stylistic 3500 pen tablet is equipped with a PC Card slot that allows you to install a Type II PC Card. 
The PC Card slot is compliant with PC CardBus Standard Release 3.0 and provides support for the 
following PC Card features: 
• Multivoltage 3.3/5 V PC Cards (detected automatically)
• CardBus (PCI bridge) type PC Cards 
• Supports PCIC (PC Card I/O Card) protocol
• Backward compatibility with previous PC Card Standard Release level PC Cards
Internal LAN/Modem
1
Stylistic 3500 pen tablet systems are equipped with an internal LAN/56 Kbps* modem. For details on the 
built-in LAN/modem, see “Internal LAN/Modem Specifications” on page 44.
ACPI Support
1
The Stylistic 3500 pen tablet supports the Advanced Configuration and Power Interface (ACPI) Specification, 
revision 1.0, in all system configurations except Windows NT 4.0; the Windows NT 4.0 operating system 
does not utilize ACPI or APM design specifications. 
* The 56 Kbps rate is nominal; due to FCC restrictions, actual rates are limited to 53 Kbps.