Fujitsu FMW4503TS128A01 User Manual
Peripheral Interface Specifications
41
Peripheral Interface Specifications
5
Specifications for peripheral interfaces on the Stylistic 3500 pen tablet are given in Table 5-5. For
specifications on peripheral interfaces provided by the port replicator, see “Port Replicator Specifications”
later in this chapter. Also note that pin assignments and other details for peripheral interfaces on the
Stylistic 3500 pen tablet are given in Chapter 6 of this manual.
specifications on peripheral interfaces provided by the port replicator, see “Port Replicator Specifications”
later in this chapter. Also note that pin assignments and other details for peripheral interfaces on the
Stylistic 3500 pen tablet are given in Chapter 6 of this manual.
Table 5-5. Peripheral Interface Specifications
Feature
Specification
Comments
PC Card Slot
One Type II PCMCIA CardBus slot.
Compliant with PC Card Standard Rev. 3.0
Compliant with PC Card Standard Rev. 3.0
Supports CardBus and PCIC (PC Card I/O
Cards)
Cards)
IDE Interface
Supports one IDE hard disk drive (2.5 inch)
IDE hard disk drive is preinstalled at factory.
Modem Port
RJ-11 connector for internal modem
See “Internal LAN/Modem Specifications” on
page 44 for more information. Note that the
LAN portion of the device is accessible only
via the mini-dock.
page 44 for more information. Note that the
LAN portion of the device is accessible only
via the mini-dock.
Serial Port
Standard 9-pin connector that allows you to
connect an external serial device.
connect an external serial device.
Universal Serial Bus
Port (USB A)
Port (USB A)
One USB Series A receptacle on pen tablet.
IrDA Port
Infrared transceiver built into pen tablet.
Compliant with IrDA Standard Revision 1.1
Supports: FIR (4 Mbps max),
SIR (115 Kbps max)
Supports: FIR (4 Mbps max),
SIR (115 Kbps max)
Range: approximately 1 M, 15 degrees from
center
center
Infrared Keyboard
Port
Port
Infrared receiver built into the pen tablet for
use with an optional infrared keyboard.
use with an optional infrared keyboard.
Proprietary Fujitsu receiver.
Range: approximately 1 M, 15 degrees from
center
Range: approximately 1 M, 15 degrees from
center
DC Power Input
16 VDC ±10%, 3.36 A
Connector vendor: Hosiden
(Hosiden part number HEC3900-01-010)
This connector is a EIAJ-RC5320A standard
connector.
Connector vendor: Hosiden
(Hosiden part number HEC3900-01-010)
This connector is a EIAJ-RC5320A standard
connector.
External power can be connected to DC
input connector on the pen tablet, mini-dock,
port replicator, or high-usage contacts. See
“DC Power Inputs” on page 67 for more
details.
input connector on the pen tablet, mini-dock,
port replicator, or high-usage contacts. See
“DC Power Inputs” on page 67 for more
details.
Audio Jacks
Monaural microphone input mini jack
Stereo headphone output mini jack
Stereo headphone output mini jack
System Interface
Port
Port
200-pin connector
For use with Stylistic 3500 port replicator or
mini-dock.
mini-dock.
High-Usage
Contacts
Contacts
8-position external contact connector
provides connections for: DC power input and
USB.
provides connections for: DC power input and
USB.
Floppy Disk Drive
Port
Port
26-pin floppy disk drive connector
For use with Fujitsu floppy disk drive.