Fujitsu FMW4503TS128A01 User Manual

Page of 110
IrDA Port
59
IrDA Port
6
The IrDA port on the Stylistic 3500 pen tablet is compliant with the Infrared Data Association (IrDA) 
Standard Revision 1.1. Specifications for the IrDA port on the pen tablet are given in Table 6-7. Before you 
can use the IrDA port, the Serial Port B Device BIOS option must be set to IrDA or FIR. See “Serial/
Parallel Port Configurations Submenu Options” on page 11 
for details on BIOS options for the IrDA port.  
Audio Jacks
6
All audio jacks on the Stylistic 3500 pen tablet and Stylistic 3500 port replicator are stereo mini jacks. 
Some audio functions on the pen tablet are disabled when audio jacks are used. Table 6-8 shows which 
audio inputs are disabled when inputs on the pen tablet and port replicator or mini-dock are used 
(enabled). Table 6-9 shows which audio outputs are disabled when outputs on the pen tablet and port 
replicator are used.
NA indicates that the condition does not apply. (The condition has no effect on the given input.) 
Table 6-7.  IrDA Port Specifications
Feature
Specification
Standard supported
IrDA Standard Revision 1.1
Distance
Up to 1 meter point to point (environmental conditions affect usable range)
Conveyable wave
Infrared rays (wavelength peak 875 nm)
Signal
Send data / Receive data
Modulation/Data Rate
IrDA SIR: 9.6 - 115.2 Kbps
IrDA FIR: 4,000.0 Kbps
Angle
0° to 15° from center of beam (30° viewing angle)
Table 6-8.  Active Audio Inputs 
Input Activity
Pen Tablet 
Port Replicator/Mini-dock
Microphone 
(built-in)
Microphone 
Input Jack
Microphone 
Input Jack
Line Input 
Jack
Microphone On 
(microphone built into pen tablet) 
Enabled
Plug not 
inserted
Plug not 
inserted
NA
Pen tablet Microphone jack used 
(external microphone connected) 
Disabled
Enabled
Plug not 
inserted
NA
Port replicator Microphone jack used
(external microphone connected)
Disabled
Disabled
Enabled
NA
Port replicator Line In jack used
NA
NA
NA
Enabled