Philips WAC5 User Manual
English
34
Reset
Reset
If desired, you can restore your Center or Station
to their default setting (including the network
setting).
to their default setting (including the network
setting).
When to reset Center or Station:
●
Resetting Center or Station helps to re-establish
the connection between Center and Station.
the connection between Center and Station.
●
To change the way your Center connects to PC,
you need to reset the Center (see the Option 1,
Option 2 or Option 3 in manual Connect to
your PC)
you need to reset the Center (see the Option 1,
Option 2 or Option 3 in manual Connect to
your PC)
1
Check the set is switched on (See
Basic
functions, Switching on/to standby and
selecting functions, Switching to Eco
power/ on)
selecting functions, Switching to Eco
power/ on)
2
Press and hold
STOP • MENU to enter the
MENU screen (or on the remote control, press
MENU)
MENU)
3
Use the navigation controls 3 or 4 and 2
to enter
to enter
Settings
4
Use the navigation controls 3 or 4 and 2
to enter
to enter
Restore settings
5
Press 3 or 4 and 2 to select
Yes
➜
The set is rebooted. Language selection
screen appears
6
Select your desired language: English, French,
Spanish, Dutch, Italian and German
Spanish, Dutch, Italian and German
➜
The set enters Installation Mode
➜
The search for Center or Stations starts. The
Wi-Fi connection is being re-established
If the Center is reset and Stations are
not reset:
not reset:
●
On the Stations, enter
Installation Mode by:
a. Remove the Station’s power plug and then,
connect it to the power supply again
➜
“
Connecting to Center” appears
b. Press
MENU or STOP to enter the selection
screen of
Installation Mode and Select
Server
c. Use the navigation controls 3 or 4 and 2 to
select
Installation Mode
If a Station is reset and the Center is not:
●
On the Center, select
HD mode and then, enter
Installation Mode by:
a. Press
a. Press
MENU
b. Use the navigation controls 3 or 4 and 2 to
enter
enter
Station Mgnt menu
c. In
Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
Add New
Station
➜
Searching for Stations starts
If both Center and Stations are reset:
●
Do as you did in the first-time Wi-Fi connection
(see
(see
Installation, Set up Wi-Fi connection
between Center and Station)
7
On Center, press
STOP
Çto exit Installation
Mode when all your Stations are found
p001-p037_WAC5_Eng_22
9/14/2005, 15:09
34