Trendnet 10/100Mbps mini Print Server User Manual

 

This method requires no additional software to be installed, but the NetBEUI or TCP/IP 
protocol must be installed on your PC. Use the following procedure to install the Print Server's 
printer as a Windows SMB network printer: 

1. Double-click 

the 

Network Neighborhood icon on the desktop. 

2. On 

the 

View menu, select Details. 

3.  Locate the desired Print Server, as shown below: 

•  If it is the same Workgroup as your PC, it will be listed on screen. 
•  If it is in a different workgroup, double-click Entire Network, then double-click the 

appropriate Workgroup to open it. 

 

4.  Double-click the Print Server icon to view a Printer icon for each printer port. The 

"Comment" field may indicate what type of printer is connected to the port. 

5.  To install a printer, right-click the desired printer icon, and choose "Install", as shown 

below. This will start the Add Printer wizard. 

 

6.  Follow the prompts to complete the installation. 

•  For information about the question "Do you print from MS-DOS programs?", see 

Printing from MS-DOS Programs below. 

•  Select the Printer Manufacturer and Model to match the printer connected to this port 

on the Print Server, and complete the Wizard. 

7.  This printer will now appear in your Printers folder (Start - Settings - Printers) and can be 

used like any other printer. However, SMB printing is not suitable for large complex print 
jobs - you should use the Peer-to-peer Printing instead. 

Page 18