Intel 747116-011 User Manual

Page of 27
Installation Guide for the Intel Server Control
7
Red Hat Linux Requirements
If you intend to manage a Linux file server, it must meet the following minimum requirements:
• 
Red Hat Linux 6.2 SBE 2 running in multiple-processor kernel
• 
32 MB of RAM
• 
60 MB of available disk space
SCO UnixWare Requirements
If you intend to manage a UnixWare file server, you must have an account with root privileges
available to you. The server must also meet the following minimum requirements:
• 
SCO UnixWare v7.1.1
• 
32 MB of RAM
• 
60 MB of available disk space
Additional Requirements for DMI-SNMP Translation
Simple Network Management Protocol (SNMP) support must be installed if you want to integrate
ISC with an SNMP-based management framework. For SNMP installation information, see your
Windows NT, NetWare, or UnixWare documentation.
On the managed server, you should consider the following issues when configuring SNMP:
• 
Community string names for SNMP Get and Set operations
• 
Community string names for sending traps
• 
The destination address for the management console receiving the traps
On the management console, you should consider the following issues when configuring SNMP:
• 
Compiling the MIBs into the SNMP management consoles
• 
Integration of ISC traps into SNMP management consoles
Console Requirements
Console System requirements may change when snapping into one of the supported management
applications. Please refer to their installation requirements for additional information.
ISC Console Software integrates into an Enterprise System Management Console or it can be
installed on a stand-alone console. The required Enterprise System Management Consoles are:
1. Intel
®
LANDesk
®
Server Management 6.xx
2. HP OpenView
Network Node Manager 6 for Windows NT
3. CA UnicenterTNG
2.2 for Windows NT
A stand-alone console manages ISC-enabled servers without Enterprise System Management. It is
implemented as an ActiveX
control that runs within its own container or third party container
application (e.g., Microsoft Management Console, Internet Explorer
v5.0 or later, or Netscape
Navigator
v3.0 or later with ActiveX
snap-in). You can choose the stand-alone environment
during setup. If you do not choose the stand-alone environment and no management console is
present, the ISC software will not install.