Fujitsu TX200FT S2 User Manual

Connecting the remaining LAN cables

After turning off the server, connect the remaining LAN cables as described below.

In the FT-system, all FTvirtual Server LAN (application data transmission), CoServer Link, and CoServer LANs

are used to control the system so it is important not to forget to connect the CoServer LAN cable to a HUB.

●Connecting the LAN cables

��

�

��

Pre-operation settings

After running mini-setup of the OS, refer to the

following and perform FT-system settings.

��

"Chapter 3 Pre-operation Settings"

When using UPS, perform UPS settings.

��

"3.4 UPS setting"

For details about maintenance after operations have

started, refer to "User's Guide Chapter 7 Operation

and Maintenance".

Support and Service

PRIMERGY information

The latest PRIMERGY, driver, and software information is

available at the address below. Use as necessary.

Before requesting repairs

If an error occurs in this server, refer to "User's Guide 7.2

Troubleshooting". If problems can still not be solved, con-

tact an office listed in the "Contact Information".

When contacting the office listed in the "Contact Informa-

tion", inform them of the product ID and manufactures

number which are detailed on labels on the base of the

server.

��

�

��

������

�

��