Fujitsu RX900 S1 User Manual

RX900 S1

Maintenance Manual

247

V

Follow the safety instructions in the chapter 

.

This section provides information on:

●

The ServerView Local Service Display on the front panel of the server 
enables you to check the status of the key system components at any time 
without opening the housing. For information on the functions provided by 
the ServerView Local Service Display see the associated documentation.

●

The chassis ID board provides two functions:

–

FRU-PROM information for identification the system, that is Product 
Model Name, Product Part Number, and Chassis Serial Number

–

Temperature sensor for monitoring the ambient temperature

The functions are essential to monitor the temperature correctly, enable 
ServerView to display the correct system picture, and to install the server 
using ServerStart. BIOS/BMC configuration data is kept on the EEPROM on 
the power distribution board. The data for the EEPROM and the current 
temperature values are transmitted to the baseboard via the I

2

C bus.

Authorized specialist personnel can carry out replacement tasks for 
integral server components. Ask you local Fujitsu service center for 
more detailed information.

V

Procedures indicated as "Authorized personnel only“ must be 
done by Fujitsu service personnel or technicians trained by 
Fujitsu for doing these tasks. Please note that unauthorized 
interference with the system will void the warranty and exempt the 
manufacturer from all liability.