Fujitsu RX900 S1 User Manual

RX900 S1

Maintenance Manual

277

●

Starting and completing the task:

–

key for the rack doors (if applicable)

–

Phillips Ph2 screw driver

●

 Replacing the baseboard:

–

Phillips Ph0 screw driver

–

Phillips Ph1 screw driver

–

Phillips Ph2 screw driver

Ê

Perform the following procedures:

1.

2.

3.

4.

5.

6. Remove all PSUs, see 

7. Remove all CPUMEMRs, see 

I

Before removing the CPUMEMRs, take a note on the installation 
slot number for each CPUMEMR. Make sure that you reinstall the 
CPUMEMR in the slot it was located before the replacement.

8. Remove all expansion cards and dummy modules in PCIe slots #8 to 

#17, see 

I

Before removing the expansion cards, take a note on the 
installation slot number for each card. Make sure that you reinstall 
the card in the slot it was located before the replacement.