Fujitsu RX900 S1 User Manual
302
Maintenance Manual
RX900
S1
Cables
15.2.2 Starting the task
Ê
Perform the following procedures:
1.
2.
3.
4.
5. Remove all CPUMEMRs, see
I
Before removing the CPUMEMRs, take a note on the installation
slot number for each CPUMEMR. Make sure that you reinstall the
CPUMEMR in the slot it was located before the replacement.
slot number for each CPUMEMR. Make sure that you reinstall the
CPUMEMR in the slot it was located before the replacement.
15.2.3 Removing the control panel
Figure 192: Disconnecting the control panel cable from the baseboard
Ê
Disconnect the control panel cable from the baseboard (1).
Ê
Open the cable clamp (2).
/
0