Fujitsu RX900 S1 User Manual
44
Maintenance Manual
RX900
S1
Basic procedures
4.5
Opening the server
V
CAUTION!
●
Only for non-hot plug components:
Before removing or installing covers, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power
cables from the outlet. Failure to do so can cause electric shock.
devices, and any other connected devices. Also unplug all power
cables from the outlet. Failure to do so can cause electric shock.
●
The housing covers must be replaced as soon as possible for
purposes of cooling, to comply with EMC regulations (regulations
regarding electromagnetic compatibility) and to prevent fires. The
housing covers must not remain open for longer than 5 minutes.
purposes of cooling, to comply with EMC regulations (regulations
regarding electromagnetic compatibility) and to prevent fires. The
housing covers must not remain open for longer than 5 minutes.
●
Follow the safety instructions in the
.
The server is accessible via three covers, see
, that can be removed
independently from each other:
2. Fan cover, see
3. Rear cover, see
You can remove the fan cover as such for accessing the fans directly. For all
other tasks, it is removed together with the front cover.
other tasks, it is removed together with the front cover.
Trained personnel