Fujitsu RX900 S1 User Manual
RX900 S1
Maintenance Manual
51
Basic procedures
4.8
Bringing the server back to operation
V
CAUTION!
●
Before turning on the server, make sure the covers are closed.
●
Follow the safety instructions in
I
This step is only applicable to replace or expand non-hot plug
components.
components.
Ê
Connect all cables on the rear of the server.
Ê
Connect all power cords to the power outlets.
Ê
Press the On/Off button to start up the server.
4.9
Closing the rack door
For information on how to close the front and rear doors of the rack see
"PRIMECENTER, Rack System for PRIMERGY, PRIME POWER, BS2000,
STORAGE".
"PRIMECENTER, Rack System for PRIMERGY, PRIME POWER, BS2000,
STORAGE".
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
integral server components. Ask you local Fujitsu service center for
more detailed information.
V
CAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
Trained personnel