Fujitsu RX600 S6 User Manual

114

Operating Manual

 RX600 

S6

Ê

Carefully press the memory board into its slot (see 

Ê

Press both handles downwards (2) so that both green release tabs engage.

Ê

Press the ATTN button.

Ê

Wait until the ATTN LED is turned off.

Ê

Close the server as described in 

.

To add memory boards during operation, proceed as follows:

Ê

Open the server (see 

).

Ê

Remove the air baffle of the respective memory board slot.

Figure 33: Removing the memory air baffle to add a memory board

Ê

Press on the top of the memory air baffle (1), move it in the direction of the 
arrow (2) and out of the housing.

I

Keep the memory air baffle for future use.

Ê

Install the equipped memory board into the respective slot.

I

Memory boards that you insert must suit the fitting rules and the 
appropriate configuration. See the "System Board D3141 for 
PRIMERGY RX600 S6 Technical Manual" for details.

/

0