Fujitsu RX600 S6 User Manual
54
Operating Manual
RX600
S6
Hardware installation
4.4.2
Connecting the power cord
Ê
Connect the power cord to the server power supply unit.
Ê
Connect the mains plug to a grounded mains outlet in the in-house power
supply network or a power outlet of the socket strip in the rack (see Technical
Manual for the rack).
supply network or a power outlet of the socket strip in the rack (see Technical
Manual for the rack).
Ê
Secure the power cords in the cable clamps so the insulated connectors
cannot be disconnected from the server accidentally.
cannot be disconnected from the server accidentally.
Figure 6: Cable clamps to secure the power cords
Ê
Thread the cable through the cable clamp as shown in
.
Ê
Pull the cable clamp tight to secure the power cord.
Now the insulated connector cannot be disconnected from the server
accidentally.
accidentally.
I
You can loosen the cable clamp by opening the small locking lever.