Fujitsu RX600 S6 User Manual

RX600 S6

Operating Manual

69

V

●

If nothing appears on the screen but flickering stripes after switching 
on the server, switch the server off immediately (see chapter 

).

●

The On/Off button does not disconnect the server from the mains 
voltage. To completely disconnect it from the mains voltage, remove 
the power plug(s) from the socket(s).

●

Do not move, strike, or shake the server when it is turned on. This can 
damage the hard disk in the server and cause data loss. 

●

Turn the server on when the temperature is in its operating 
environment range (10 – 35°C). For details on the operating 
environment, refer to "Safety Precautions". When operating the 
device outside of this operating environment, the server may operate 
improperly, damage data etc. Furthermore, Fujitsu cannot be held 
responsible for any related damage, malfunction, or loss of data, etc. 

●

Be sure to wait for 10 seconds or more after shutdown before turning 
the server on. 

●

After connecting the power cords, press the On/Off button after it 
passes for more than 10 seconds. 

The power-on indicator (see 

) lights up orange (standby 

mode) when the server is connected to the mains.

– Starting up for the first time:

For the Japanese market, please refer to " はじめにお読みください ".

Ê

Press the On/Off button (see 

Ê

Insert ServerView Suite DVD 1 in the DVD drive.

Ê

Follow the on-screen instructions (see also section 

 or section