Fujitsu RX600 S6 User Manual
RX600 S6
Operating Manual
79
7
Troubleshooting and tips
V
CAUTION!
Follow the safety instructions in the "Safety notes and regulations"
manual or " 安全上のご注意 " and in chapter
manual or " 安全上のご注意 " and in chapter
.
If a fault occurs, attempt to resolve it using the measures described:
– in this chapter,
– in the documentation for the connected devices,
– in the help systems of the software used.
– in the documentation for the connected devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê
Make a list of the steps performed and the circumstances that led to the fault.
Also make a list of any error messages that were displayed.
Also make a list of any error messages that were displayed.
Ê
Switch off the server.
Ê
Contact our customer service team.
7.1
Power-on indicator remains unlit
The power-on indicator remains dark after the server has been connected to
mains.
mains.
Power cable incorrectly connected
Ê
Make sure that the power cable(s) is/are correctly connected to the server
and the grounded power outlet(s).
and the grounded power outlet(s).
7.2
Server switches itself off
Server Management has detected an error
Ê
Check the error list of System Event Log in ServerView Operations Manager
or in the iRMC S2 web interface, and attempt to eliminate the error.
or in the iRMC S2 web interface, and attempt to eliminate the error.