Fujitsu RX600 S6 User Manual
RX600 S6
Operating Manual
97
CSS components
8.1.3.2
Removing/installing the dummy module
Free slots are provided with dummy modules. Remove the dummy module
before installing an additional HDD/SSD module.
before installing an additional HDD/SSD module.
Figure 19: Removing/installing the 2.5-inch dummy module
Ê
Press both tabs on the dummy module together until the locking mechanism
disengages (1).
disengages (1).
Ê
Pull the dummy module out of the bay (2).
To install a dummy module, follow the same procedure in reverse order.
V
CAUTION!
Store the dummy module in a safe place. If you have removed an
HDD/SSD module and do not install a new one in its place, put the
dummy module back in its place for cooling, to comply with EMC
regulations (regulations regarding electromagnetic compatibility), and for
protection against fire. Ensure that the dummy module engages correctly
in the bay.
HDD/SSD module and do not install a new one in its place, put the
dummy module back in its place for cooling, to comply with EMC
regulations (regulations regarding electromagnetic compatibility), and for
protection against fire. Ensure that the dummy module engages correctly
in the bay.
1
0
0