Fujitsu V6.00 User Manual
ServerView Event Manager
93
Trap overview
communication
Established
Established
8
Communication is established
between the agent and power
supply.
between the agent and power
supply.
informational
communicationLost
1
Communication between the
agent and power supply was
interrupted.
agent and power supply was
interrupted.
major
contactFault
18
One of the contacts on the
Measure UPS has changed
from its default position.
Measure UPS has changed
from its default position.
major
contactFaultResolved
19
An error on one of the
Measure UPS contacts has
been resolved.
Measure UPS contacts has
been resolved.
informational
hardwareFailure
Bypass
Bypass
20
The UPS is on bypass due to a
hardware failure.
hardware failure.
major
lowBattery
7
The UPS system batteries are
low and will soon be
exhausted. If utility power is not
restored the UPS will put itself
to
low and will soon be
exhausted. If utility power is not
restored the UPS will put itself
to
sleep
and immediately cut
power to the load.
major
powerRestored
9
Utility power has been restored
after the occurrence of an
after the occurrence of an
upsOnBattery
condition.
informational
restartAgent
29
The agent was restarted on the
command of the manager.
command of the manager.
informational
returnFromBypass
23
The UPS has returned from
bypass mode.
bypass mode.
informational
returnFromLowBattery
11
The UPS has returned from a
lowBattery
condition.
informational
smartAvrReducing
31
The UPS has enabled
SmartAVR voltage reduction.
SmartAVR voltage reduction.
minor
smartBoostOn
6
The UPS has enabled
SmartBoost
.
minor
Trap name
ID
Meaning
Error class
Table 19: APC traps