Fujitsu BX600 S2 User Manual
PRIMERGY BX600 S2 Basic Unit
45
Installing the Hardware
Connecting External Devices
4.4.2
Instructions on Connecting and Disconnecting
Cables
Cables
V
CAUTION!
Make sure you read the documentation on the devices before connecting
them.
them.
Do not connect or disconnect data cables during a thunderstorm.
When removing a cable, always hold it by the plug.
Connect and disconnect the cables in the order described below.
Connecting Cables
Ê
Turn off all power and equipment switches.
Ê
Pull all power plugs out of grounded power sockets or CEE sockets.
Ê
Plug all cables into the system and peripherals. Secure the data trans-
mission cable connections (e.g. nut retention).
mission cable connections (e.g. nut retention).
Ê
Plug all data communication cables into the utility sockets.
Ê
Plug all power cables into the grounded power sockets or CEE sockets.
Disconnecting Cables
Ê
Turn off all power and equipment switches.
Ê
Pull all power plugs out of grounded power sockets or CEE sockets.
Ê
Unplug all data communication cables from the utility sockets.
Ê
Undo the nut retention on the connector housings and pull the corre-
sponding cables out of the basic unit and the peripherals.
sponding cables out of the basic unit and the peripherals.