Fujitsu BX600 S3 User Manual
BX600 S3
Operating Manual
109
Fibre Channel I/O Blades
Port Assignment
9.6
Port Assignment
Slots NET3 and NET4 on the back of the basic unit can be fitted with Fibre
Channel I/O blades. The Fibre Channel I/O blade in the NET3 slot is connected
to port A of the installed Fibre Channel daughter cards. The Fibre Channel I/O
blade in the NET4 slot is connected to port B of the installed Fibre Channel
daughter cards.
Channel I/O blades. The Fibre Channel I/O blade in the NET3 slot is connected
to port A of the installed Fibre Channel daughter cards. The Fibre Channel I/O
blade in the NET4 slot is connected to port B of the installed Fibre Channel
daughter cards.
Figure 57: Slots for Fibre Channel I/O blades
The installation of two FC switch blades enables redundant Fibre Channel con-
nections to be provided for the server blades.
nections to be provided for the server blades.
V
CAUTION!
●
FC switch blades must always be installed in slot NET3 first. This
ensures that port A of the FC daughter cards is connected if
redundant Fibre Channel connections are not used.
ensures that port A of the FC daughter cards is connected if
redundant Fibre Channel connections are not used.
●
If Gigabit Ethernet daughter cards are installed in the server blades,
LAN switch blades (see
LAN switch blades (see
) or Ethernet pass-thru blades (see
) must be installed in slots NET3 and NET4.
Simultaneous operation of Ethernet blades and Fibre Channel blades
in slots NET3 and NET4 is not permitted.
in slots NET3 and NET4 is not permitted.
NET4
NET3