Fujitsu BX600 S3 User Manual

Page of 164
BX600 S3
Operating Manual
27
Important Notes
Transporting the Basic Unit
specified by Fujitsu Technology Solutions. The correction of interferences 
caused by such unauthorized modification, substitution or attachment will be the 
responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to 
any and all optional peripheral or host devices. Failure to do so may violate FCC 
and ICES rules.
3.5
Transporting the Basic Unit
V
CAUTION!
Transport the PRIMERGY BX600 S3 basic unit only in its original 
packaging or in a packaging which protects it from knocks and jolts. 
Do not unpack the basic unit until you have finished transporting it.
For safety reasons, at least two people are needed to install the basic 
unit because of its weight and size.
Before lifting the basic unit into the rack, remove server blades, fan 
units and power supplies from the system unit to reduce weight.
Use the handles on the front and the fold-away handles on the long 
sides to lift or carry the basic unit.
Never lift or transport the basic unit using the handles on the rear.
3.6
Notes on Installing in the Rack
V
CAUTION!
For safety reasons, at least two people are needed to install the 
basic unit because of its weight and size.
For lifting the basic unit, use the handles on the front and the fold-out 
handles on the long sides of the chassis.
Before lifting the basic unit into the rack, remove server blades, fan 
units and power supplies from the system unit to reduce weight.
For lifting the basic unit, use the handles on the front and the fold-out 
handles on the long sides of the chassis.
Never lift or transport the server using the handles on the rear.