Fujitsu BX600 S3 User Manual

BX600 S3

Operating Manual

59

Preparation for Use and Operation

I

The management blade LAN controller only runs at 10 Mbit/sec. 
Duplex mode must be defined manually via the 

 

(see 

 below).

Figure 20: Agent NIC Duplex Mode menu

Ê

Enter 

 if the preset duplex mode value needs to be altered or 

.

I

The transfer rate of 10 Mbit/sec and the duplex mode of the manage-
ment blade must comply with the client LAN controller! Automatic 
synchronization is not supported by the management blade LAN con-
troller.

Ê

Enter 0 in this menu and in the preceding menus to leave the management 
blade console menu.

Ê

Close the HyperTerminal session.

Ê

Unplug the power cable from the basic unit and plug it in again to reboot the 
management blade.

I

This ensures that the management blade continues to act as the 
master after the restart. A restart without interruption to the power 
supply would cause the master/slave assignment to change.

The management blade can now be accessed via the LAN. For more informa-
tion on the management blade configuration, see the manual “

”. Information on the configuration of the various switch blade 

models can be found in sparate manuals, see 

.